ZONEMOTIVE 11055363 Oxygen Sensor Downstream Rear 1.7L

( Brand: Zonemotive ), ( Manufacturer Part Number: 11055363 ), ( Manufacturer Warranty: 1 Year ), ( Type: Struts ), ( Fitment Type: Direct Replacement ), ( Terminal Type: Blade ), ( Connector Gender: Male ), ( Custom Bundle: No ), ( Sensor Type: Heated ), ( Mounting Type: Threaded ), ( Universal Or Specific Fit: Specific ), ( Attachment Method: Screw-on ), ( Included: 1 Oxygen Sensor ), ( Wire Length: 29.61 In. ), ( Housing Wire Color: Black )

Review ZONEMOTIVE Oxygen Sensor 2001 2005 Honda 1.7l Acura Downstream Rear fits CIVIC NSX 1995–1999

The Zonemotive 11055363 Oxygen Sensor is a crucial component in maintaining the optimal fuel-air mixture in your engine, ensuring efficient combustion and reduced emissions. This particular sensor is designed for use in specific Honda and Acura models, including the 2001-2005 Honda Civic with a 1.7L engine, as well as the 1995-1999 Acura NSX.

The Zonemotive oxygen sensor is a downstream rear type, which means it's located after the catalytic converter in the exhaust system. Its primary function is to monitor the amount of unburnt oxygen in the exhaust gases, providing real-time feedback to the engine's computer. This data is crucial for the engine's fuel-air mixture control, ensuring a balanced and efficient combustion process.

This Zonemotive oxygen sensor is made with high-quality materials to ensure durability and reliability. It features a ceramic element and a stainless steel housing, both of which are resistant to corrosion and high temperatures, ensuring long-term performance even under the most demanding conditions. The sensor also comes with a heat shield, which helps protect it from direct exposure to the exhaust heat, further extending its lifespan.

The Zonemotive 11055363 Oxygen Sensor is easy to install, with a simple plug-and-play design. It fits directly into the existing sensor location in your vehicle, requiring no modifications or additional parts. The sensor also comes with all necessary mounting hardware, making installation a straightforward process that can be done by most DIY enthusiasts.

In conclusion, the Zonemotive 11055363 Oxygen Sensor is a high-quality, reliable, and easy-to-install component that is essential for maintaining the performance and efficiency of your 2001-2005 Honda Civic 1.7L or 1995-1999 Acura NSX. By ensuring optimal fuel-air mixture and reducing exhaust emissions, this sensor helps improve fuel economy, reduce engine wear, and enhance overall vehicle performance.

1. OEM Replacement: This part is a direct replacement for the original sensor, ensuring a perfect fit and function.

2. High-Quality Materials: Zonemotive uses top-notch materials to manufacture their sensors, ensuring durability and reliability.

3. Improved Engine Performance: A functional oxygen sensor helps maintain optimal fuel-air mixture, which can improve engine performance and fuel efficiency.

4. Long-Lasting: The sensor is designed to last for a long time, reducing the need for frequent replacements.

5. Cost-Effective: Compared to some aftermarket brands, this Zonemotive sensor offers excellent value for money.

1. Limited Brand Recognition: Zonemotive is not as widely recognized as some other car parts brands. However, their products generally receive positive reviews.

2. Potential Shipping Delays: As with any online purchase, there's a chance that the shipping time may be longer than expected.

Buying the Zonemotive 11055363 oxygen sensor for your 2001-2005 Honda Civic 1.7L and 1995-1999 Acura NSX downstream rear can provide excellent value for money due to its high-quality materials, OEM replacement, and potential to improve engine performance. The limited brand recognition and potential shipping delays are minor cons that may not significantly impact your decision. It's recommended to consider these factors along with the product's positive reviews and cost-effectiveness.

Details:

Worn-out sensors can be tough to remove, but a good penetrating oil helps ensure they come out. Make sure it is centered and goes in smoothly as you begin rotating clockwise by hand. If the check engine light was on, it most likely will turn off as well. Turn it counterclockwise to loosen it, and then finish unscrewing by hand.

2001 2005 Honda Civic 1.7L Downstream. 5.Start the car to see if problem is fixed. 2.Disconnect the electrical connection to oxygen sensor. 4.Unscrew the oxygen sensor using a ratchet wrench.

It will end in a plastic plug inserted into an outlet. 3.Turn the sensor clockwise to secure it on exhaust line. The first sensor will always be next to the motor in engine compartment. Choose a vehicle from the My Garage list.

To remove it, locate the small tab on end of plug. Cleaning Method. Cut open the bag, then use a glove or clean rag to spread small amount of lubricant onto new sensors threads. After rinsing with water, install the sensor and repeat fourth step of measurement.

If the cleaning is not satisfactory, continue this work until white carrier can be seen. The function of the oxygen sensor is to determine information about whether there excess in exhaust after engine burns, that is, content, and convert content into a voltage signal transmit it computer, so can realize closed-loop control with air factor as target; ensure; three-way catalytic converter has greatest conversion efficiency for three pollutants hydrocarbons HC, carbon monoxide CO nitrogen oxides NOX gas, maximizes purification emission. Once it is tightly in place, use an oxygen sensor socket or open end wrench to give a final turn. It causes your vehicle to burn fuel more efficiently, sounds better, runs smoothly, and uses less.

Installation Location. 3.Spray some penetrating oil onto the sensor to loosen it. 4.Plug the electrical connector back into vehicle. Follow the cable away from end of sensor plugged into exhaust line.

1x New Oxygen Sensor. Look for a part that looks like spark plug with thick, black cable coming out of it. Add the lubricant to opening where sensor plugs into exhaust line. Package Included.

Make sure the new sensor is same size and shape as old one. Fit the tip of sensor into hole on exhaust line. Use the make and model of your car to find correct oxygen sensor. The new sensor makes a big difference.

Take the car out on road to make sure it stays off. Plug it into the outlet port close to exhaust line. If the check engine light comes back on, either oxygen sensor wan installed correctly or your vehicle has another problem. 1995 1999 Acura NSX 3.0L Downstream Rear.

The threads are the grooves in metal ring near tip of sensor. Fit the wrench over sensor where it plugs into exhaust line. 2.Add a small amount of anti-seize to the new sensor. New sensors come packed with a bag of bronze gel.

The ratio depends on the surface of sensor head. If you don't have one, try using an open end wrench. While pushing the tab down, pull plug back by hand. 1997 1999 Acura NSX 3.2L Downstream Rear.

part #: 11055363 price

• $15.33

specifications acrasensor:

• for models: Nsx, Civic
• for makes: Honda, Acura
• for years: 1995-1999
• brand: Zonemotive
• mpn: 11055363
• manufacturer warranty: 1 Year
• type: Struts
• fitment type: Direct Replacement
• terminal type: Blade
• connector gender: Male
• custom bundle: No
• sensor type: Heated
• mounting type: Threaded
• universal or specific fit: Specific
• attachment method: Screw-on
• included: 1 Oxygen Sensor
• wire length: 29.61 In.
• housing wire color: Black

returns acrasensor:

• paid by: Seller
• time: 30 Days
• policy: Returns Accepted

general acrasensor:

• condition: New
• Car Truck Parts Accessories > Air Fuel Delivery > Air Intake Fuel Sensors

offer acrasensor:

• sold: 0
• options: Ship-to-home
• started: August 10, 2024
• best offers: True
• availability: In Stock
• quantity: 10

seller acrasensor:

• rating: 99.2%
• # reviews: 4787
• city: Ontario, California

shipping acrasensor:

• class: Standard
• transit: 5-9 Days
• type: Fixed
• service: Standard
• cost: $0.00

payments acrasensor:

• wallet: Paypal
• credit card: American-express
• other